Material datasheets available free. Online registration at: www.materialdatacenter.com
Dyneon PTFE - PFA - Dyneon
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Dyneon PTFE" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
... process temperatures exceeding 100 °C. In combination with an economical processing technique like paste extrusion, pipelines, hoses and compensators as well as columns and vessels can be protected in this way against corrosion. PropertyTest methodDyneon PTFEDyneon TFM Specific gravity*) [g/cm³]DIN EN ISO 120862.15….2.182.15….2.18Tensile strength at room temperature [MPa]DIN EN ISO 527-334…..4235….47Elongation at break at room temperature [%]DIN EN ISO 527-3370.... 470400….625Poisson ratio [-...
Kunststoffe international, 2017-11-29, An Attritional Rendezvous
...KEP). By adding PTFE, it is possible to combine its good sliding properties with the high mechanical strength of POM [1].PTFE belongs to the group of semicrystalline thermoplastics and is marketed under the trade names Algoflon (Solvay Solexis), Dyneon PTFE (Dyneon), Fluon (Asahi), Polyflon (Daikin), and Teflon (DuPont). The molecular structure permits the conclusion that internally, PTFE has a polar nature, but externally it is completely non-polar, and is therefore anti-adhesive and practicall...
Kunststoffe international, 2019-04-25, Putting 3D Printing to the Test
...able photopolymer, for example, would be presented sometime this year. Dr. Jens Eichler from the central research department of 3M Deutschland GmbH in Neuss, Germany, also talked about the fully fluorinated high-performance polymer Dyneon PTFE that was unveiled at K 2016. A stereolithographic technique patented by 3M allows even small parts to be manufactured additively, with mechanical properties and microstructure which are very similar to those from subtractive processing and which, in the fi...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.